Skip to content
Flat in three-quarter view: the white top with the wavy front edge and two slots along the short sides, one at each end.
Flat with the basin offset to the left and the top extending to the right, with the integrated towel slot and a red towel.
A long white Flat top, with the basin in the centre below a tall mirror, on a dark wall.
Detail of Flat from above: the shaped edge of the white top, the waste outlet and the tap in front of the mirror.

Flat. The made-to-measure washbasin.

Made-to-measure tops and washbasins, also with multiple basins

Meeting the regulations, and the right to a safe bathroom, should not rule out made-to-measure components. Goman Flat opens a new path in inclusive and accessible bathrooms. Methacrylic resin makes it suitable not only for contract projects but also for replacing or renewing existing bathroom fittings. Designing and installing Flat in made-to-measure versions makes it possible to customise solutions and adapt them precisely to the widest range of requirements: from people’s specific needs to those of distinctive, sophisticated interiors.

Law 13/1989 and architectural barriers: results and limits

The idea

Flat: multiple washbasins and made-to-measure tops

After the experience and success of the Flight washbasin, Goman wanted to complete its range with a design that could offer several washbasins on the same top. Methacrylic resin, a material the company already had experience with, was the best solution because it can be worked almost like a wooden panel and can therefore be shaped to measure as required. As well as meeting the client’s requirements, the design once again set out to be defined by its lightness and essential form.

The right to a safe bathroom does not rule out made-to-measure.

Flat as built: the white wall-hung top below the tall mirror, on a dark wall, next to a chest of drawers with a red towel.
Flat from the front, seen from above: the white top with the basin and waste outlet, the slightly concave front edge and the tap in front of the mirror.

Technical data

Manufacturer
Goman
Thickness
12 mm
Load capacity
150 kg, according to the standard

Source: Goman catalogue, accessories and furnishings (opens in a new tab)

Frequently asked questions

Can several accessible washbasins be fitted on a single made-to-measure top?

Yes. Flat is made of methacrylic resin, which can be worked almost like a wooden panel: the top is shaped to measure and takes several washbasins, with a load capacity of 150 kg according to the standard. It is designed for contract projects and for replacing or renewing existing bathrooms, without giving up made-to-measure components.

Law 13/1989 and architectural barriers: results and limits

Share the case study

Do you need to design or renovate accessible bathrooms?

Bathroom tops, products and routes defined around people’s needs, from replacing fittings to the most sophisticated interiors.

Related projects

Back to top